Water Controls » Valve With Flow Meter
Electrically operated solenoid valves fitted with an integral hall effect flow meter. The hall effect sensor utilises a seperate low voltage power supply and gives a pulsed output with an average of 230 pulses per minute. The valves are typically used in potable water applications ie. Drinks vending machines, water coolers, coffee brewers/machines, refridgeration/coolers along with glass washers, humidifiers, spa pool systems and shower systems.
| Name | Value |
|---|---|
| Ambient Temperature | 60 °C maximum |
| Medium Temperature | Water/ air 90 °C maximum |
| Pressure Range | 0.2 to 10 bar |
| Flow Regulation | 0.25 to 17 litres per minute. Accuracy +/- 3% at 5 litres per minute. |
| Operating Limits | Continuous 100%, Tm 90 C, Tu 25 C, 3 minutes on 5 minutes off, Tm 90 C, Tu 60 C |
| Power Draw | 6 VA |
| Rated Voltage | 230V, 120V or 24V AC, 24V or 12V AC/DC |
| Coil Insulation | Class F- 140 °C operating temperature |
| Frequency | 50/60 Hz or DC |
| Terminals | Two 6.35mm x 0.8 mm male tab terminals |
| Ports | Inlet 3/4 BSP (gaz), outlet 10 or 12mm hose barb |
| Construction | Polyamide body with Nitrile or EPDM diaphragm minimum burst pressure 65 bar |
| Approvals | All major electro-technical and potable water standards ie: EN 60730-2-8, UL429, BEAB and WRAC |
Return to Water Controls category.