Solenoid Valves » Valve With Flow Meter
Electrically operated solenoid valves fitted with an integral hall effect flow meter. The hall effect sensor utilises a seperate low voltage power supply and gives a pulsed output with an average of 230 pulses per minute. The valves are typically used in potable water applications ie. Drinks vending machines, water coolers, coffee brewers/machines, refridgeration/coolers along with glass washers, humidifiers, spa pool systems and shower systems.
| Name | Value |
|---|---|
| Ambient Temperature | 2 °C to 70 °C maximum |
| Liquid Temperature | 2 °C to 70 °C maximum |
| Pressure Range | 0.2 to 10 bar |
| Flow Regulation | 0.25 to 17 litres per minute |
| Operating Limits | Continuous 100%, Tm 70 °C, Tu 25 °C, 3 minutes on 5 minutes off, Tm 70 °C, Tu 60 °C |
| Power Draw | 6 VA |
| Rated Voltage | 230v, Others On Request |
| Coil Insulation | Class F- 140 °C operating temperature |
| Frequency | 50/60 Hz or DC |
| Terminals | Two 6.35mm x 0.8 mm male tab terminals |
| Ports | Inlet 3/4 BSP (gaz), Outlet 10mm or 12mm, Single or Two Way, Inline or Right Angled. |
| Construction | Polyamide body with Nitrile or EPDM diaphragm minimum burst pressure 31.5 bar |
| Approvals | All major electro-technical and potable water standards ie: EN 60730-1 EN60730-2-8, BS6920 |
Return to Solenoid Valves category.